Maxphotonics co.,ltd

High quality product, professional service, being the core supplier in laser industry!

Buy Q Switch Pulsed Metal Fiber Laser Engraving Source Price

Brief Introduction: As the most representative products, the series of MaxPulse Q-Switch pulse fiber lasers use the design of high reliability and high integration, gather all of the advantages in one fancy package, and have been accepted by numerous customers, and occupied more market shares...

Send Inquiry
Product Details

q switch fiber laser.jpg

Brief Introduction:

As the most representative products, the series of MaxPulse Q-Switch pulse fiber lasers use the design of high reliability and high integration, gather all of the advantages in one fancy package, and have been accepted by numerous customers, and occupied more market shares among all of the similar products, the most appropriate word for it, is “installing means enjoying”.

Products Feature:

High efficiency

Good beam quality

Compact rugged package

Maintenance free operation


Technical Parameters:

ParametersUnitDataDataDataDataData
Type
MFP-10MFP-20MFP-30MFP-50MFP-100
Central Emission Wavelengthnm1064±41064±41064±41064±41064±4
Polarization
RandomRandomRandomRandomRandom
Nominal Output Powerw10203050100
Single Pulse Energymj0.5~0.60.8~1.00.8~1.00.8~1.00.8~1.0
Beam Qualitym2<1.4<1.8<1.8<2.0<2.0
Beam Diametermm<5<5<5<5<5
Pulse Widthns80~12080~12080~140100~140100~160
Output Power Tunability%5~1005~1005~1005~1005~100
Operation VoltageVDC2424 2424220VAC
Power ConsumptionW(20°C)120170190200400
Fiber Lengthm1.9/2.5/31.9/2.5/31.9/2.5/31.9/2.5/31.9/2.5/3
Cooling
Air CoolingAir CoolingAir CoolingAir CoolingAir Cooling

(All parameters is believed to be accurate and is subject to change without notice.)


Product Application:

Widely used marking on metal, part of the non-metallic plating materials, plastic rubber, industrial-used plastics, ceramics and other marking, Deep carved, Fine processing, Special material processing.

20160820215308_11946.jpg

20160820215423_64248.jpg


Laser operating environment requirements

In order to ensure the safety of laser working area, the proper enclosure shall be used. It includes but not limited to the laser safety sign and interlocking device, and the corresponding operation personnel shall receive the assessment training and know the regular safety specification of the laser operation. Meanwhile, the important point is that the installation of output component shall not keep the same level with the eyes.

The interaction of laser and metal materials will produce the ultraviolet ray with high intensity or radiation of visible light. The laser shall be equipped with the protection cover to avoid the radiation from the damage to eyes or other parts of the body.

 

Maxphotonics highly recommends you to carry out the operation according to the following measures to extend the service life of the laser:

1. The laser shall not be exposed under the high temperature and high humidity environment.

2. The laser shall be placed in the cabinet with the temperature/humidity control and dust prevention function.

The operation under the high temperature will accelerate the aging of equipment, or increase current threshold, and reduce the laser sensitivity and conversion efficiency. If the equipment is too hot, please don't use it and ask for help from Maxphotonics.

The proper ventilation shall be guaranteed in the working area. The interaction between laser light and working surface may produce the additional safety damage due to the gas, spark and debris produced by the high temperature.

 

Notes:

The careless equipment operation may bring the accidental damage to the equipment.

If the laser is placed under the environment with the temperature of 0℃ or below, the anti-freezing solution with the corresponding ratio shall be added to the water channel of water-cooling machine, and water in the inlet and outlet channel shall be drained due to failure on long-term use for the equipment (the high pressure air gun shall be used to prevent the icing of residual water from damaging the water passing device as suggested).


Maxphotonics Co.,Ltd is a professional manufacturer and supplier of various laser equipment which is of high quality, high speed, high power and high performance. If you are looking for buy Q switch pulsed metal fiber laser engraving source price, we must be your best choice as we now have such product for sale. Welcome to get low cost small, portable, mini or desktop equipment service at competitive price with us.


Related Products
Inquiry